Casablanca Fan Company 65GxxD Install Bulb And Glass, Install Light Kit Base, Alignment Tab

INSTALL LIGHT KIT BASE

Step 15. Attach the WHITE wire plug from the bulb plate to the WHITE wire plug of the fan. Then at- tach the BLACK wire plug from the bulb plate to the BLACK wire plug of the fan. The plugs have alignment tabs, assure these are aligned—do not force the connection.

Using the provided light kit screws, attach the light kit bulb plate to the light kit base, securing by hand only. Assure that no wires are pinched.

ALIGNMENT

TAB

ALIGNMENT	LIGHT KIT
TAB	SCREWS

INSTALL BULB AND GLASS

LIGHT KIT

BULB PLATE

Step 16. Screw the 100-watt halogen bulb into the socket. Do not touch the glass bulb with your fingers–it is extremely important that the glass be clean. If it is touched, or dirty, clean carefully with a tissue. A dirty glass bulb will cause the bulb to fail almost immediately.

IMPORTANT! When installing the halogen bulb, care- fully cut off the end of the plastic sleeve the bulb comes in and hold the bulb by the plastic sleeve to screw it into the socket.

HALOGEN BULB

(100 WATT)

Step 17. Position the indentations in the outer rim of the glass shade so that they line up with the tabs on the inside surface of the fan light fixture rim.

Step 18. Carefully lift the glass shade up inside the light fixture as far as it will go.

Step 19. Rotate the shade in a clockwise direction until it is held tightly in place by the three tabs.

TIP: At first the shade is a very loose fit in the fixture and can be “wiggled” a little from side to side. It is a great help when rotating the glass shade to “wiggle” it at the same time.

TABS

GLASS

GLASS SHADESHADE

INDENTATION

10