30AutoView 1415/1515/2015 Switch Installer/User Guide
Once engaged, your console will remain locked until you press any key or move the mouse. You will then need to type in your password to continue.
Use the Security dialog box to lock your console with password protection, set or change your password and enable the screen saver.
NOTE: If a password has been previously set, you will have to enter the password before you can access the Security dialog box. If you should lose or forget your password, please contact Avocent Technical Support about returning your switch for service. See Appendix D:Technical Support for contact information.
To access the Security dialog box:
1.Press Print Screen to launch the OSCAR interface. The Main dialog box will appear.
2.Click Setup - Security. The Security dialog box displays.
Figure 3.14: Security Dialog Box
NOTE: Figure 3.12 is the Security screen for the administrator and local user when the Enable User Accounts feature is turned off. The restricted user can only access the Change Password function of this screen.
To set or change the password:
1.
2.Type the new password in the New text box and press Enter.
Passwords must contain both alpha and numeric characters, are case sensitive and may be up to 12 characters long. Supported characters are: A to Z, a to z, 0 to 9, space and hyphen.
3.In the Repeat box, type the password again and press Enter.
4.Click OK to change only your password, and then close the dialog box.
To password protect your console:
1.Set your password as described in the previous procedure.
