Using a CompactFlash Card
Your CASSIOPEIA supports Type I and Type II CompactFlash Cards (3.3V). The following describes the types of CompactFlash card you can use with your
CASSIOPEIA.
Storage Card
A storage card functions the same as the CASSIOPEIA’s data storage memory. You can use a storage card to store the various files created by your CASSIOPEIA, and you can even install programs on a storage card. Data you store on a storage card is retained even when you remove the card from your CASSIOPEIA, which means a card can be used to port data between your CASSIOPEIA and computer or other device, or to keep backup copies of important data.
Digital Camera Card
The CASIO Digital Camera Card
Modem Card
A modem card lets you connect to a telephone line (standard household modular jack, public telephone with modular jack, etc.) for modem data communications.
Wireless Modem Card
With a wireless modem card, you can perform mobile data communication without a wire connection to a telephone circuit.
Important
•Gently but firmly slide the card into place as far as it will go, but do not force it. Forcing a card can damage connectors. If you have problems inserting a card, pull it out and check to make sure it is oriented correctly.
•We strongly recommend that you store all unsaved data you are inputting or editing before performing this procedure.
•Sometimes, your CASSIOPEIA may not be able to detect a CompactFlash card. This is indicated when a program on the card does not start up normally. When this happens, remove the card, reinsert it, and then press the CASSIOPEIA [Reset] button.
•Your CASSIOPEIA supports 3.3V CompactFlash cards only. 5.0V cards are not supported.
27
