Casio CTK-4000, CTK-5000 Editing Sampled Drum Set Sounds, Press, Press, 2.Press cr, 3.Press cs, 7.Press the keyboard key, 5.Output the sound from the external device

Sampling Sounds and Playing Them on the Digital Keyboard

5.Output the sound from the external device.

Sampling will start automatically.

S a m p l i n g

Lights

6.After the sound you want to sample is finished, press cr.

S m p l D r m 1

Remaining memory capacity

Sampling will stop when you release cr.

•Even if you do not press cr, sampling will stop automatically whenever there is no more sound being input from the external device. Sampling also will stop automatically 10 seconds after it is started.

7.Press the keyboard key.

•You can repeat steps 3 through 6 to change other sounds that make up the currently selected drum set. There are eight sounds per drum set.

•You may not be able to get 10 seconds of sampling if Digital Keyboard memory is low due to storage of other data. If this happens, deleting other memory data you no longer need will free up memory space and you should be able to sample for 10 seconds. See “Deleting a Sampled Sound” on page E-23 for more information.

•Sampling a sound will delete any sound data currently assigned to the same keyboard key. To help ensure that you do not accidentally delete important data, be sure to read “Protecting Against Accidental Deletion of Sampled Sounds” on page E-24.

Editing Sampled Drum Set Sounds

You can use the procedures in this section to copy the drum sound assigned to one keyboard key to another key, to change the pitch of a sound, and to delete a sampled sound.

1.Press bo and then use br (10-key) to enter the tone number (CTK-5000: 676, 677, or 678) (CTK- 4000: 576, 577, or 578) for the drum set you want.

2.Press cr.

3.Press cs.

S m p l D r m 1

Flashes at high speed

This is the editing mode.

•While in the editing mode, you can copy a sound, change the pitch of a sound, or delete a sound (each of which is described below). Pressing cs again exits the editing mode and returns to step 2 of this procedure.

Indicates keyboard keys that have sounds assigned.

■To copy a sampled sound from one key to another

While holding down the keyboard key to which the sampled sound you want to copy is assigned, press the keyboard key to which you want to copy it.

Example: To copy sampled sound of key C4 to key D4

Indicates the keyboard key whose sound was copied.

•A keyboard key that already has a sampled sound assigned cannot be selected as a copy destination.

English

E-21