Casio CTK-4000, CTK-5000 Display, to edit, English, Settings, 10. Press, 5. Press bp, Setting Type, pattern you selected in step, you want (intro through ending)

					Editing Auto Accompaniment Patterns
3. Press a button from 7 to bk to select the			7. To edit the other contents, press cs to display
Accompaniment Pattern you want to edit.				the screen for the setting you want.
The name of the pattern will appear on the display.				•	Each press of cs will cycle through the settings shown
					below, from 1 through 6.
				•	Use the br (10-key) [–] and [+] keys to change the
	D r m : R h y .				currently selected setting.
				•	You can play the current settings of the editable part by
					pressing bl.
					Setting Type	Display	Settings
			1	Part on/off		Part	On/Off
		9 Variation selected
			2	Tone number*		Tone	001 - 553 (CTK-4000)
Pattern selected by each button
							001 - 653 (CTK-5000)
7: Intro
			3	Volume level		Vol.	000 - 127
8: Normal, Normal Fill-in
				Left-right speaker
(Each press toggles the selection.)			4			Pan	–64 - 0 - 63
9: Variation, Variation Fill-in				balance (panning)
(Each press toggles the selection.)			5	Reverb depth		Rvb	000 - 127
bk: Ending
				(reverb send)
4. Press bm to select the instrument part you want
			6	Chorus depth		Cho.	000 - 127
to edit.				(chorus send)
The part number of the part you select will flash on the			* Instrument parts 1 and 2 can be assigned drum set tones
display.			only.
Parts that contain data. Flashing: Part selected for editing.			8. Repeat steps 4 through 7 as many times as
				necessary to edit the parts you want for the
				pattern you selected in step 3.
				•	If you change the rhythm number in step 6, the editable
					contents (1 through 6 in the above table) you last
					configured in step 7 of this procedure will be overwritten
		Part 6 (Chord 3)
					with the settings of the newly selected rhythm.
5. Press bp.			9. Repeat steps 3 through 8 as many times as
This will display the rhythm number.				necessary to edit the accompaniment patterns
6. Use the br (10-key) [–] and [+] keys to select the				you want (intro through ending).
rhythm number you want to assign to the			10. Press 5.
instrument part you are editing.
				This will display a message asking if you want to save the
A different rhythm number is assigned for each instrument
				user rhythm.
part.

•You can play the data of the currently selected rhythm number by pressing bl.

•All of the eight instrument parts of an intro (I-1 to 8) must have the same rhythm number. If you assign rhythm 003 to I-1, for example, 003 also will be assigned automatically to parts I-2 through I-8. If you then assign rhythm 004 to part I-2, for example, I-1 and all of the other parts also will change to 004. All of the eight parts of an ending (E-1 to E-8) also must have the same rhythm number.

English

B E-43