Casio CTK-4000, CTK-5000 Using Tracks to Record and Mix, Parts, ■ About tracks, ■To delete recorded data, Recording Your Keyboard Play, ■Maintaining Data in Recorder Memory

Recording Your Keyboard Play

8. Press 4 twice to exit the recorder mode.					Using Tracks to Record and Mix
					Parts
					You can divide a song according to various types of parts
					(instrument, left and right hand, etc.), and record each part to
					a specific track. You can mix up to six tracks (the original track
			Disappears
					plus five additional tracks) into a final song.
	• The flashing on the screen shown in step 3 becomes				■ About tracks
		faster when remaining recorder memory capacity
					Tracks are numbered from 1 to 6.
		becomes less than 100 notes.
	•	Total recorder memory capacity is approximately			• If you do not specify a track number when recording,
		12,000 notes. Recording will stop automatically when			recording is performed to Track 1 automatically.
		there is no more unused recorder memory remaining.			In addition to what you play on the keyboard, the following
	•	Each press of 4 cycles through the settings shown
		below. You can listen to the recorded data as many			information also is recorded.
		times as you like by pressing bl while in playback			• Track 1
		standby.			Settings:
					Tone number, rhythm number, tempo, reverb, chorus,
					chords, layer/split settings, Auto Harmonize/Arpeggiator
		Recorder Off	Playback	Record	setting
					Operations:
			Standby	Standby
					Pedal, pitch bend wheel (CTK-5000 only), INTRO button,
					SYNCHRO/ENDING button, NORMAL/FILL-IN button,
					VARIATION/FILL-IN button
					• Tracks 2 through 6
		Disappears	Lights	Flashes
					Tone number, pedal operation, pitch bend wheel operation
					(CTK-5000 only)

■To delete recorded data

After step 3 of the above procedure, do hold down 4 (without pressing any keyboard key) until the message “Tr.Del?” appears on the display. Press [+] (YES) to delete the data, or [–] (NO) to cancel the delete operation.

•Turning off the Digital Keyboard while recording is in progress will cause any data in recorder memory to be deleted.

•A new recording replaces (deletes) previously recorded contents.

■Maintaining Data in Recorder Memory

After you save data in recorder memory, it will remain there as long as power is supplied to the keyboard. However, if you disconnect the AC adaptor when there are no batteries loaded, data in recorder memory will be deleted.

Tips for Maintaining Data

•Use both batteries and the AC adaptor together.

•Make sure that batteries with sufficient power are loaded whenever you disconnect the AC adaptor.

•Connect the AC adaptor to the keyboard and plug it into a power outlet before replacing batteries.

Before connecting or disconnecting the AC adaptor or replacing batteries, first press 1 to turn off power.

English

B E-49