Casio CTK-4000, CTK-5000 Recalling a Preset Scale (CTK-4000Only), Using the Current Scale Notes for Auto, Accompaniments, Saving User Scales (CTK-5000Only), E-6), 2. Press, 2. Press

Other Useful Digital Keyboard Functions

	Recalling a Preset Scale (CTK-4000 Only)		■ Saving Data on an External Device
				(CTK-5000 only)
You can use the following procedure to select from among 17
			• SD memory card (page E-61)
preset scales, including the standard Equal Temperament.
			• Computer (page E-68)
1. Press bp.			■ Maintaining Data in User Scale Memory
2. Press 3.				(CTK-5000 only)
			After you save data in user scale memory, it will remain there
			as long as power is supplied to the keyboard. However, if you
			disconnect the AC adaptor when there are no batteries
			loaded, data in user scale memory will be deleted.
		E q u a l	Tips for Maintaining Data
			•	Use both batteries and the AC adaptor together.
			•	Make sure that batteries with sufficient power are loaded
		Scale Name		whenever you disconnect the AC adaptor.
3. Use the br (10-key) [–] and [+] keys to select the			•	Connect the AC adaptor to the keyboard and plug it into a
				power outlet before replacing batteries.
	preset scale you want. After selecting a scale,		Before connecting or disconnecting the AC adaptor or
	press the key on the keyboard that you want to
			replacing batteries, first press 1 to turn off power.
	use as the root key (C to B).		Using the Current Scale Notes for Auto
	• There are a total of 17 scales: the 16 shown in the table
	above (page E-54) plus Equal Temperament (Number:		Accompaniments
	00, Scale Name: Equal).
			You can use the following procedure to reflect the scale you
4. After you are finished, press 3 to assign the
			adjusted using the scale fine tune or the quarter tone function,
	scale to the keyboard.		or the preset scale you selected with the preset function in
			Auto Accompaniments.
	Saving User Scales (CTK-5000 Only)		1. Press cs and then use the br (10-key) [4] ( )
You can store up to four “user scales” configured by you in				and [6] ( ) keys to display “OTHER” (page
memory for later recall when you need them.				E-6).
■ To save a user scale
1. Press bp.					O T H E R
2. Press 3.
3. While holding down cn, press a button from bt
					Flashes
	to cm to select an area.
■ To recall a user scale			2. Press br (10-key) [7] (ENTER) key.
1. Press bp.			3. Use the br (10-key) [4] ( ) and [6] ( ) keys
2. Press 3.				to display “AcompScl”.
			4. Use the br (10-key) [+] key to select on.

3.Use buttons bt to cm to select the user scale you want to recall.

English

E-55