Playing a Built-in Tune

To fast reverse

1While a tune is playing or paused, hold down the REW button to skip in a reverse direction at high speed.

•The fast reverse operation skips back one measure at a time.

•The measure and beat numbers on the display change while the fast reverse operation is being performed.

Measure number Beat number

2Releasing the REW button starts song playback from the measure whose number is shown on the display.

NOTE

•Fast reverse does not work while tune play is stopped.

•Certain playback conditions can cause it to take some time before fast reverse starts after you press the REW button.

To fast forward1While a tune is playing or paused, hold down theFF button to skip forward at high speed.

•The fast forward operation skips forward one measure at a time.

•The measure and beat numbers on the display change while the fast forward operation is being performed.

Measure number Beat number

2Releasing the FF button starts song playback from the measure whose number is shown on the display.

NOTE

•Fast forward does not work while tune play is stopped.

Looping a Musical Phrase

You can select one or more measures and “loop” them, which means that they play again and again until you stop playback.

1While the tune is playing, press the REPEAT button while the measure you want to start from is playing.

•This causes the repeat indicator to flash on the display, and displays the measure number of the start measure.

2When playback is within the measure you want to specify as the end of the loop, press the REPEAT button again.

•This displays the measure number of the end measure, and starts repeat play of the loop.

•To cancel repeat play of a loop, press the REPEAT button again so the repeat indicator is not displayed.

To change the melody tone1Press the TONE button.

Indicator appears

2Find the tone you want in the TONE List, and then use the number buttons to input its three-digit number.

Example: To select “124 VIOLIN”, input 1, then 2, then 4.

• You can select any one of the keyboard’s built-in tones.

V i o l i n

NOTE

•You can also use the [+] and [–] buttons to change the melody tones.

•For two-hand tunes (Piano Bank tunes), the same tone is applied for both the left and right hand parts.

•Specifying the tune number for the same tune that is currently selected returns the melody tone to the default setting for that tune.

706A-E-023A

E-21