Using a Microphone for Sing Along
| MIC VOLUME |
MIC jack | KEY CONTROL/TRANSPOSE |
Number buttons
[+] /
SING ALONG <PLAY/STOP>
Connecting a commercially available microphone* to the MIC IN jack makes it possible to sing along with the keyboard’s
*If a microphone was included with your keyboard, use that microphone. If your keyboard did not come with a microphone, use a commercially available microphone that satisfies the stipulated specifications.
Using the microphone jack
When connecting a microphone, be sure to first adjust the MIC VOLUME to a relatively low setting, and then adjust to the level you want after connecting.
1Set the MIC VOLUME knob setting so it is on the “MIN” side.2Turn on the microphone’s ON/OFF switch.3Use the MIC VOLUME knob to adjust microphone volume to the level you want.Microphone ON/OFF switch
Microphone
MIC VOLUME knob
IMPORTANT!
•Be sure to use the microphone’s ON/OFF switch to turn off the microphone and to disconnect the microphone
from the keyboard whenever you are not using it.
•Dynamic microphone (standard plug)
Howling (Feedback Noise)Any of the following conditions can cause howling (feedback noise).
•Covering the head of the microphone with your hand
•Positioning the microphone too near to a speaker
Should howling occur, try grasping the microphone further away from the head, and move away from any nearby speaker.
Static NoiseFluorescent lighting can cause static noise in the microphone signal. When this happens, move away from the lighting you suspect may be causing the static.
To use a microphone for sing along
PREPARATION
•Adjust the main volume (page
•See page
Indicators appear