Song Memory Function

Track 1 Data

In addition to notes played on the keyboard and chord accompaniments, the following data is also stored in Track 1 during performance recording.

•Tone number•Rhythm number

•INTRO button, SYNCHRO/ENDING button, NORMAL/ FILL-IN button, VARIATION/FILL-IN button operations

•Pedal operations

•Layer and split settings, and their tone settings

•Split point

•Tempo setting

•Effect setting

Track 1 Recording Variations

■To record without rhythmSkip step 5 of the above procedure.•Recording without rhythm starts as soon as you press a keyboard key.■To start recording with synchro startIn place of step 5 of the above procedure, press the SYNCHRO/ENDING button.

•Now Auto Accompaniment and recording will start when you play a chord within the accompaniment keyboard range.

■To insert an intro, ending, or fill-in into a recording During recording, press the INTRO button, SYNCHRO/ ENDING button, NORMAL/FILL-IN button, or VARIATION/FILL-IN button as required.

■To start recording with an intro using synchro start

In place of step 5 of the above procedure, press the SYNCHRO/ENDING button and then the INTRO button.

•Now Auto Accompaniment and recording will start with an intro pattern when you play a chord within the accompaniment keyboard range.

■To start Auto Accompaniment part way into a recording In place of step 5 of the above procedure, press the SYNCRHO/ENDING button, and play something within the melody range of the keyboard.

•This records the melody without any accompaniment. Auto Accompaniment will start when you play a chord within the accompaniment keyboard range.

Playing Back a Performance Recording

Perform the following procedure when you want to play back a tune you recorded with performance recording.

1Press the RHYTHM button to enter the rhythm mode.

2Use the SONG MEMORY button to select playback standby.

3Press the controller block START/STOP button.

•This starts playback of Song Memory performance recording contents. During playback, you can press the LEFT/TRACK 1 or RIGHT/TRACK 2 button to mute either track and listen to the contents of the other track only.

•You can adjust the tempo at this point, if you want.

4To stop playback, press the controller block START/ STOP button again.

NOTE

•During performance recording playback, the entire range of the keyboard operates as a melody keyboard, regardless of the MODE switch setting. You can play along with performance recording playback, if you want. You could use layer and split (page E-43 through E-45) at this time to assign multiple tones to the keyboard.

•Note that pause, skip forward, and skip back operations cannot be performed during performance recording playback.

706A-E-043A

E-41