Viewing Snapshots and Movies on a TV Screen
1.Use the AV cable that comes with the camera to connect it to the TV.
| Yellow | White |
TV | Video | Audio |
|
|
AUDIO IN jack (white)
VIDEO IN jack (yellow)
Terminal cover 
AV cable (bundled)
USB/AV port
Making sure that the 6 mark on the camera is aligned with the 4 mark of the AV cable connector, connect the cable to the camera.
•Make sure that you insert the cable connector into the USB/AV port until you feel it click securely into place. Failure to insert the connector fully can result in poor communication or malfunction.
•Note that even while the connector is fully inserted, you
still will be able to see the metal part of the connector as shown in the illustration.
• Make sure that the camera is turned off before plugging in or unplugging the cable. Check the user documentation that comes with the TV for information
about requirements before plugging into or unplugging from the TV.
2.Turn on the TV and select its video input mode.
If the TV has more than one video input, select the one where the camera is connected.
3.Press [p] (PLAY) to turn on the camera.
This will cause an image to appear on the TV screen, without anything appearing on the camera’s monitor screen.
•Pressing [ON/OFF] or [r] (REC) will not turn on the camera while the AV cable is connected.
•You also can change the aspect ratio of the screen and the video output system (page 159).
109 | Viewing Snapshots and Movies |
|