
Specifying ISO Sensitivity (ISO)
ISO sensitivity is a measure of sensitivity to light.
1.In the REC mode, press [SET].
2.Use [8] and [2] to select the third control panel option from the top (ISO Sensitivity).
3.Use [4] and [6] to select the setting you want and then press [SET].
AUTO Adjusts sensitivity automatically according to conditions
ISO 100 | Lower | Slow shutter speed | Less noise | |||
| sensitivity |
|
|
|
| |
ISO 200 |
|
|
|
| ||
|
|
|
| |||
|
|
|
|
|
| |
|
|
|
|
|
|
|
ISO 400 |
|
|
|
|
|
|
ISO 800 |
|
|
|
|
|
|
|
| Fast shutter speed (Set | Some coarseness | |||
ISO 1600 |
|
| ||||
|
| |||||
Higher | for shooting in dimly lit | (increased digital | ||||
ISO 3200 | sensitivity | areas.) | noise) | |||
|
|
|
|
|
|
|
•In the S (shutter speed priority) mode, ISO sensitivity always operates according to its “AUTO” setting. The ISO sensitivity setting cannot be changed while in the S mode.
•The current ISO sensitivity setting is used when shooting a high speed movie in the M (manual exposure) mode. For all other types of movies, “AUTO” is used as the ISO sensitivity setting.
•“S Image AS” (page 92) can be used only when the ISO sensitivity setting is “AUTO”.
•Higher ISO sensitivity values tend to result in digital noise in images.
•Since higher ISO sensitivity values tend to result in digital noise in images, the camera performs a noise filtering process. Because of this, it may take relatively longer for the camera to finish recording an image after it is shot. You will not be able to perform any key operation while image recording is in progress.
39 | Snapshot Tutorial |
|