4.Now you can display images and play back movies as you normally do.
IMPORTANT!
•Output to a TV is not supported while the camera is in the REC mode.
•When the camera is connected to a TV for movie playback, only movie images are displayed on the TV screen. The camera’s monitor screen will show
•Before connecting to a TV to display images, be sure to configure the camera’s
[r] (REC) and [p] (PLAY) buttons for “Power On” or “Power On/Off” (page 158).
•Audio is initially output by the camera at maximum volume. When you first start displaying images, set the TV volume control at a relatively low level and then adjust it as required.
NOTE
•Audio is monaural.
•Some TVs may not be able to output images and/or audio correctly.
•All icons and indicators that appear on the monitor screen also appear on the TV screen. You can use [8] (DISP) to change the display contents.
Recording Camera Images to a DVD Recorder or Video Deck
Use the following method to connect the camera to the recording device using the camera’s bundled AV cable.
–DVD recorder or video deck: Connect the AV cable to the VIDEO IN and AUDIO IN terminals.
–Camera: Connect the AV cable to the USB/AV port.
You can play a slideshow of snapshots and movies on the camera and record it on a DVD or video tape. You can record movies by selecting “» Only” for the slideshow “Images” setting (page 111).
For information about connecting a monitor to the recording device and about how to record, see the user documentation that comes with the recording device you are using.
110 | Viewing Snapshots and Movies |
|