Problem

Possible Cause and Recommended Action

 

Images are not

This camera cannot display non-DCF images recorded onto a

 

displayed.

memory card using another digital camera.

 

 

 

 

Images cannot be

Note that you cannot edit the following types of snapshots.

 

edited (with White

• Snapshots created using MOTION PRINT

 

Balance,

• CS group snapshots

 

Brightness, Resize,

• Movies

 

Trimming,

• Snapshots recorded with another camera

 

Rotation).

 

Other

 

 

The wrong date

The date and time setting is off. Set the correct date and time

 

and time are

(page 155).

 

displayed, or the

 

 

wrong date and

 

 

time are being

 

 

stored along with

 

 

image data.

 

 

The messages on

The wrong display language is selected. Change the display

 

the display are in

language setting (page 156).

 

the wrong

 

 

language.

 

 

 

 

 

Images cannot be

1)The USB cable may not be connected securely. Check all

 

transferred over a

connections.

 

USB connection.

2)The wrong USB communication protocol is selected. Select

 

 

the correct USB communication protocol in accordance with

 

 

the type of device you are connecting (pages 134, 143).

 

 

3)If the camera is not turned on, turn it on.

 

 

4)Your computer may not be able to recognize the camera if

 

 

you connect via a USB hub. Always connect directly to the

 

 

computer’s USB port.

 

Language selection

1)You did not configure initial settings after purchasing the

 

screen appears

camera or the camera may have been left with a dead

 

when the camera is

battery. Configure the correct settings (pages 19, 156).

 

turned on.

2)There may be a problem with the camera’s memory data. If

 

 

this is the case, perform the reset operation to initialize the

 

 

camera’s setup (page 160). After that, configure each setting.

 

 

If the language selection screen does not re-appear when you

 

 

turn the camera on, it means that the camera’s memory

 

 

management data has been restored.

 

 

If the same message appears after you turn power back on,

 

 

contact your retailer or a CASIO authorized service center.

 

 

 

180

Appendix