4.Use [8] and [2] to select “On” and then press [SET]. This will protect the image and display the › icon.
•To unprotect an image, select “Off” in step 4 and then press [SET].
5.After you are finished, select “Cancel” and then press [SET] to exit this operation.
NOTE
•Note that even if a file is protected, it will be deleted if you perform the format operation (page 164).
.To protect all the images in a CS group
1.While a CS group is displayed or while the images of a CS group are scrolling on the monitor screen, press [MENU].
2.Use [4] and [6] to select the “PLAY” tab.
3.Use [8] and [2] to select “Protect” and then press [SET].
4.Use [4] and [6] to display the CS group you want to protect.
5.Use [8] and [2] to select “On” and then press [SET].
This will protect all the images in the group and display the › icon.
•To unprotect all of the images in the group, select “Off” in step 5 and then press [SET].
6.Press [MENU].
NOTE
•Note that even if a file is protected, it will be deleted if you perform the format operation (page 164).
121Other Playback Functions (PLAY)