6.Use [4] and [6] to scroll through the pre-recorded images on the monitor screen.

Use [4] and [6] to scroll through the pre-recorded images. Each image appears, along with an indication of the timing when it was pre-recorded.

–0.4 sec.

 

–0.3 sec.

 

–0.2 sec.

 

–0.1 sec.

 

SHUTTER

(0.4*)

 

(0.3*)

 

(0.2*)

 

(0.1*)

 

(Full-press)

*Seconds prior to full-press of shutter button.

•The timing of the image you select here will be the timing of the image displayed first in step 4 the next time you perform the above procedure. If you select the image that was pre-recorded 0.3 seconds prior to full-press of the shutter button, for example, the –0.3-second image will be displayed in step 4 the next time you perform the above procedure.

7.To save the currently displayed image as the final images, press [SET].

NOTE

•With this BEST SHOT scene, the flash setting automatically becomes ? (Flash Off).

•The Self-timer cannot be used with this BEST SHOT scene.

•With this BEST SHOT scene, half-pressing the shutter button fixes focus and exposure at their current levels.

•With this BEST SHOT scene, image recording will not be successful if you full- press the shutter button without allowing enough time (at least 0.4 seconds) after half-pressing it.

•Pay close attention to the subject when shooting. Failure to do so can cause considerable lag from the instant you want to shoot until you actually full-press the shutter button. This can cause image recording to be too late, even if you use this function.

•The current “Review” setting (page 96) is ignored when shooting with this function. Immediately after you full-press the shutter button, one of the five pre-recorded images will appear on the display as in step 4 of the above procedure.

80

Using BEST SHOT