.To transfer computer screen captures to the camera
1.Connect the camera to your computer (page 139).
2.On your computer, click the following: Start * All Programs * CASIO * Photo Transport.
This starts up Photo Transport.
3.Display the screen whose screen capture you want to transfer.
4.Click the [Capture] button.
5.Draw a boundary around the area you want to capture.
Move your mouse pointer to the upper left corner of the area you want to capture and then hold down the mouse button. Keeping the mouse button depressed, drag the pointer down to the lower right corner of the area and then release the mouse button.
6.Follow the instructions that appear on the display.
This will send an image of the area you selected to the camera.
•The transfer operation converts screen captures to JPEG format.
•The instructions that appear on the display and details about the transferred images will depend on your Photo Transport setup. For details, click the [Settings] button or [Help] button and check the setup.
.About settings and help
Click the [Settings] button when you want to change the Photo Transport setup. For help about operation procedures and troubleshooting, click the Photo Transport [Help] button.
146Using the Camera with a Computer