Connecting Directly to a PictBridge Compatible Printer
You can connect the camera directly to a printer that supports PictBridge and print images without going through a computer.
.To set up the camera before connecting to a printer
1.Turn on the camera and press [MENU].
2.On the “Set Up” tab, select “USB” and then press [6].
3.Use [8] and [2] to select “PTP (PictBridge)”, and then press [SET].
.Connecting the Camera to a Printer
Use the USB cable that
comes bundled with the camera to connect the
camera to your printer’s USB port.
• The camera does not
draw power over the USB cable. Make sure
the camera’s battery is sufficiently charged
before connecting.
• Make sure that you insert
the cable connector into the USB/AV port until
you feel it click securely into place. Failure to
insert the connector fully can result in poor communication or malfunction.
• Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.
•When connecting the USB cable to a USB port, make sure you align the connector correctly with the port.
115 | Printing |
|