Using Flash (Flash)
1. | In the REC mode, press [2] ( | ) once. |
| Flash | ||
2. | Use [4] and [6] to select the flash |
|
| |||
| setting you want and then press [SET]. |
|
| |||
| • You can select the flash mode by pressing |
|
| |||
| [2] ( | ) in either of the following cases. | [2] ( | ) | ||
| – When “Flash” is not shown on the |
|
| |||
| Control Panel (page 34) |
|
|
| ||
| – After [8] (DISP) is pressed to clear the information from the monitor screen | |||||
| (page 151) |
|
|
|
| |
| > Auto Flash | Flash fires automatically in accordance with exposure | ||||
| (amount of light and brightness) conditions. | |||||
|
|
| ||||
?Flash Off Flash does not fire.
Flash always fires. This setting can be used to brighten a
<Flash On subject that normally comes out dark due to daylight or backlight (daylight synchro flash).
¥ | Red Eye | Flash fires automatically. This type of flash can be used to |
Reduction | reduce the chance of redness in the subject’s eyes. | |
|
|
|
3.Press the shutter button to shoot.
| Back lamp |
| Flashes orange while the flash is charging to indicate that image |
A | recording is disabled. |
| • You will not be able to take another flash snapshot until the lamp |
| stops flashing orange, which indicates that charging is complete. |
<indicates the flash will fire.
• For information about Flash Range, see page 179.
37 | Snapshot Tutorial |
|