Correcting Image Brightness (EV Shift)
Procedure
[r] (REC) * [MENU] * Quality Tab * EV Shift
For details, see the Control Panel procedure on page 47.
Controlling White Balance (White Balance)
Procedure
[r] (REC) * [MENU] * Quality Tab * White Balance
You can adjust white balance to match the source of light available where you are shooting and avoid the blue cast that results when shooting outdoors when it is cloudy, and the green cast that results when shooting under fluorescent lighting.
Auto | Configures the camera to adjust white balance automatically |
¤(Daylight) For shooting outdoors on a clear day
'(Overcast) For shooting outdoors on an overcast rainy day, in the shade, etc.
“ (Shade) For shooting on a clear day in the shade of trees or buildings
†(Day White | For shooting under white or day white fluorescent lighting | |
Fluorescent) | ||
| ||
– (Daylight | For shooting under daylight fluorescent lighting | |
Fluorescent) | ||
|
«(Tungsten) For shooting under light bulb lighting
For configuring the camera manually to suit a particular light source.
1Select “Manual”.
2Under the lighting conditions you plan to use when shooting, point the camera at a
Manualblank white piece of paper so it fills the entire monitor screen and then press the
shutter button.
3Press [SET].
The white balance setting is retained even if you turn off the camera.
•When “Auto” is selected for the white balance setting, the camera automatically determines the white point of the subject. Certain subject colors and light source conditions can cause problems when the camera tries to determine the white point, which makes proper white balance adjustment impossible. If this happens, select the white balance setting that matches your shooting conditions (Daylight, Overcast, etc.)
82 | Advanced Settings |
|