Small connector
[USB/AV] port
Making sure that the 6 mark on the camera is aligned with the 4 mark of the USB cable connector, connect the cable to the camera.

4. Turn off the camera

USB port

USB cable

and then use the USB

 

(included with camera)

cable that comes with

 

the camera to connect

Large connector

it to your computer.

 

• The camera does not draw power over the USB cable. Check the

battery level before connecting and make

sure it is not too low.

• Make sure that you insert the cable connector into the USB/

AV port until you feel it click securely into place.

Failure to insert the connector fully can result in poor communication or malfunction.

• Note that even while the connector is fully inserted, you still will be able to see the metal part of the connector as shown in the illustration.

• When connecting the USB cable to a USB port, make sure you align the connector correctly with the port.

•Your computer may not be able to recognize the camera if you connect via a USB hub. Always connect directly to the computer’s USB port.

5.Turn on the camera

6.Windows 7, Windows Vista users: Click “Start” and then “Computer”.

Windows XP users: Click “Start” and then “My Computer”.

7.Double-click “Removable Disk”.

•Your computer recognizes the memory card loaded in the camera (or built-in memory if there is no card) as a removable disk.

123Using the Camera with a Computer