1.Use [8] and [2] to select the continuous shutter mode you want, and then press [SET].

2.Press the shutter button to shoot.

Images continue to be shot as long as you keep the shutter button depressed. Releasing the shutter button stops shooting.

IMPORTANT!

•If there is not enough available capacity on the memory card, you may not be able to record the number of CS images indicated on the monitor screen.

•Make sure your memory card has sufficient remaining capacity before shooting with continuous shutter.

•With continuous shutter, exposure and focus for the first image are applied for successive images as well.

•When using a continuous shutter mode, keep the camera still until shooting is finished.

•Continuous shutter cannot be used in combination with any of the following.

–Premium Auto

–Some BEST SHOT scenes

–Make-up Mode, Landscape Mode

•The ISO sensitivity setting always is “Auto” for continuous shutter.

•You cannot use the self-timer in combination with “4 fps” or “10 fps”.

•The flash range for Flash CS is narrower than that for normal flash.

•Shooting a very bright subject can cause a vertical band or a pink cast on the monitor screen image. This does not indicate malfunction.

Using the Self-timer (Self-timer)

Procedure

[r] (REC) * [MENU] * REC Tab * Self-timer

For details, see the Control Panel procedure on page 45.

70

Advanced Settings