Shooting a Snapshot while Shooting a Movie
1.While a movie is being recorded, press the shutter button. Movie recording continues after the snapshot is recorded.
NOTE
• You can use [2] ( | ) while shooting a movie to change the flash mode setting. |
•Movie recording is interrupted for a few seconds at the point where a snapshot is recorded.
•During movie recording, shooting a snapshot with any of the following is not possible.
–Premium Auto
–A, S, or M mode
–Some BEST SHOT scenes
Recording Audio Only (Voice Recording)
Voice Recording lets you record audio only, without a snapshot or movie.
• For information about Voice Recording capacities, see page 177.
1.In the REC mode, set the mode dial to b (BEST SHOT).
2.Press [SET].
3.Use [8] and [2] to select the bottom Control Panel option (BS) and then press [SET] (page 33).
4.Use [8], [2], [4], and [6] to select the “Voice Recording” scene and then press [SET].
This causes ` to appear on the monitor screen.
5. Press the shutter button to start recording. | Recording time |
•The back lamp flashes green while recording is in progress.
•Pressing [SET] during recording will insert a marker into the recording. During playback, you will be able to jump to the markers in the recording.
6.Press the shutter button again to stop audio
recording. | Remaining recording |
• To create another audio recording file, repeat | time |
steps 5 and 6. |
|
•To turn off Voice Recording, set the mode dial to t (Auto).
58Recording Movie Images and Audio