OTHER RECORDING FUNCTIONS
IMPORTANT! 
•MOVIE BEST SHOT scenes were not recorded using this camera. They are provided as samples only.
•Images recorded using a MOVIE BEST SHOT scene may not produce the results you expected due to shooting conditions and other factors.
•You can change the camera settings that are made when you select a MOVIE BEST SHOT scene. Note, however, that the MOVIE BEST SHOT settings revert to their defaults when you select another MOVIE BEST SHOT scene, change the recording mode, or turn off the camera. If you want to save your settings for later use, save them as a MOVIE BEST SHOT user setup.
NOTE 
•Turning on the camera while it is in the MOVIE BEST SHOT Mode will cause operation guidance and the currently selected sample scene to appear on the monitor screen for about two seconds.
Creating Your Own MOVIE BEST SHOT Setup
You can use the procedure below to save the setup of a movie you recorded as a MOVIE BEST SHOT scene. After that, you can recall the setup whenever you want to use it.
1.Align the mode dial with “
”, and then press [SET].
•This enters the MOVIE BEST SHOT Mode and displays a sample scene.
2.Use [] and [] to display “Register User
Scene”.
3.Press [SET].
4.Use [] and [] to display the movie whose setup you want to save.
5.Use [] and [] to select “Save”, and then press [SET].
•The normal MOVIE BEST SHOT screen will reappear after the save operation is complete. Now you can use the procedure on page 111 to select your user setup for recording.
112