PLAYBACK
Cropping an Image
You can use the following procedure to crop a portion of an enlarged image.
1.In the PLAY mode, use [] and [] to scroll through images and display the one you want to crop.
2.Press [MENU].
3.Select the “PLAY” tab, select
“Trimming”, and then press [].
•This causes a cropping boundary to appear.
•Note that this operation is possible only when a snapshot image is on the monitor screen.
4.Use the zoom controller to make the cropping boundary larger or smaller.
•The smaller the image, the more limited is the size of the cropping boundary.
5.Use [], [], [], and [] to move the cropping boundary up, down, left, or right until the area of the image you want to extract is within the boundary.
6.Press [SET] to extract the part of the image enclosed in the cropping boundary.
•If you want to cancel the procedure at any point, press [MENU].
135