PRINTING IMAGES
1.Press [MENU].
2.Select the “Set Up” tab, select “USB”, and then press [].
3.Use [] and [] to select the setting you want, and then press [SET].
When connecting to this type of | Select this setting: | |
device: | ||
| ||
|
| |
Computer | Mass Storage | |
|
| |
PTP (PictBridge) |
•Mass Storage causes the camera to see the computer as an external storage device. Use this setting for normal transfer of images from the camera to a computer (using the bundled Photo Loader application).
•PTP (PictBridge) simplifies the transfer of image data to the connected device.
4.Check the battery level indicator to make sure that the battery is charged sufficiently, and then press the power button to turn off the camera.
•If battery power is low, charge the battery or switch to AC power.
•To power the camera using AC power, you need to purchase an optionally available AC adaptor.
•The camera does not draw power over the USB cable.
5.Use the USB cable that comes with the camera to connect the camera to a printer.
•When connecting the USB cable to the camera, make sure the symbol on the camera’s [USB/AV] port is aligned with the symbol on the USB cable plug.
symbols
USB/AV
USB
| 178 |
| C |
|
|
|
|