To turn off the camera
You can turn off the camera by doing either of the following.
•Press the camera’s [ON/OFF] button.
•Press the USB cradle’s [USB] button.
IMPORTANT!
•When connecting to a TV to display images, be sure to configure the camera’s [
] (REC) and [ 
] (PLAY) buttons for “Power On” or “Power On/Off” (page 197).
•All icons and indicators that appear on the monitor screen also appear on the TV screen.
You can use [DISP] to change the display contents.
•Audio is monaural.
•Certain TVs may cut off part of the images.
•Audio is initially output by the camera at maximum volume. When you first start displaying images, set the TV volume control at a relatively low level and then adjust it as required.
NOTE
•After using an optionally available AV cable
•You can use the camera’s USB cradle to connect to a DVD recorder or video deck and record images from the camera. There are various different methods you can use in order to connect to another device when recording images. The following describes one method for connection using the AV cable that comes with the camera.
–DVD recorder or video deck: Connect to the VIDEO IN and AUDIO IN terminals.
–USB cradle: Connect to the [AV OUT] (AV output port)
–Camera: Place onto the cradle
You can play a slideshow of snapshots and movies on the camera and record it on a DVD or video tape. You can
record movies by selecting “ 
Only” for the slideshow “Images” setting (page 147). When recording to DVD recorder or video deck, you can turn off display information (page 57) so indicators and other information is not recorded along with the image.
To view the image that is being recorded, connect a TV or other monitor to the DVD recorder or video deck that is connected to the camera. For information about connecting a monitor to the DVD recorder or video deck and about how to record, see the user documentation that comes with the DVD recorder or video deck you are using.
B | 152 | VIEWING SNAPSHOTS AND MOVIES |
|
| |
|
|
|