3. Press the camera’s [ON/OFF] button to turn it

7. Press the USB

on and then press [MENU].

cradle’s [USB] button.

• Do not place the camera on the USB cradle yet.

4. On the “Set Up” tab, select “USB” and then press [X].

[USB]

5. Use [S] and [T] to select “Mass Storage” andUSB Lamp then press [SET].

6.Press the camera’s [ON/OFF] button to turn it off and then place the camera on the USB cradle.

•Do not place the camera onto the USB cradle while it is turned on.

•If you plan to transfer images from the camera’s built-in memory to your Macintosh, make sure there is no memory card loaded in the camera.

241

USING THE CAMERA WITH A COMPUTER