4.Use [W] and [X] to select the candidate you want to correct.

5.Use [S] and [T] to select “Correct” and then press [SET].

Select “Cancel” to exit the procedure without performing keystone correction.

IMPORTANT!

If the original image is smaller than 2M (1600 × 1200 pixels) size, the new (corrected) version will be the same size as the original one.

Keystone correction cannot be performed on the following types of images.

Movie images

Images created with MOTION PRINT

Images recorded with another camera

The keystone correction operation cannot be performed if there is not enough memory to store the corrected image.

When you display a corrected image on the camera’s monitor screen, the date and time indicate when the image was originally recorded, not when the image was corrected.

When a keystone corrected image appears on the full- month calendar screen, it is displayed on the date that it was corrected (page 155).

161

EDITING IMAGES