■Re-recording Snapshot Audio

IMPORTANT!

•Note that you cannot restore the original audio once you delete or re-record the audio of a snapshot.

1.In the PLAY mode, use [W] and [X] to scroll through images and display the snapshot whose audio you want to re-record.

2.Press [MENU].

3.On the “PLAY” tab, select “Dubbing” and then press [X].

4.Use [S] and [T] to select “Delete” and then press [SET].

•If you just want to delete the audio of the snapshot without re-recording anything, press [MENU] here and skip the rest of this procedure.

5.Press the shutter button to start audio

recording.

This deletes the previous recording and replaces it with the new one.

6.Press the shutter button again to stop audio recording.

Recording will stop automatically after about 30 seconds if you do not press the shutter button.

174

USING AUDIO