and reboot.
15.Continue with FDISK and FORMAT steps as if you were installing a conventional hard drive.
CONCATENATION (JBOD)
This RAID array allows you to use one, two, three or four hard drives to a array. It does not provide any data protection or performance improvement but can be useful for utilizing leftover space on disks.
1.As the BIOS boots press Ctrl+F4 or F4 when prompted to enter the RAID BIOS.
2.At the next screen select Create RAID Set, then press Enter.
3.Select CONCATENATION, then press Enter.
4.Select the number of drives then press Enter.
5.Select the first drive, press Enter.
6.If applicable select the 2nd, 3rd, 4th drive pressing enter after each selection.
7.When asked Are You Sure(Y/N)?, press Y to accept.
8.Press Ctrl+E to exit the BIOS.
9.When asked Are you sure to exit(Y/N)?, press Y to exit and reboot.
10.Continue with FDISK and FORMAT steps as if you were installing a conventional hard drive.
Deleting RAID Arrays
1.As the BIOS boots press Ctrl+S or F4 when prompted to enter the RAID BIOS.
Page 13 |
