Manuals / Vantec / Computer Equipment / Computer Hardware

Vantec UGT-ST310R user manual Table of Contents

Models: UGT-ST310R

1 20

Page 2

Table of Contents
1.	Bus Interface	3
2.	Connectors	3
3.	Package Contents	3
4.	System Requirements	4
5.	Hardware Description	4
6.	Hardware Installation	5
7.	Device Connection	5
8.	RAID Arrays	6
	RAID 0 (Striping)	6
	RAID 1 (Mirror)	8
	RAID 0+1 (Mirroring + Striping)	9
	RAID 5 (Parity)	11
	CONCATENATION (JBOD)	13
9.	BIOS Configuration	15
10.	Driver Installation	15

UGT-ST310R

Page 2

Image 2

Contents

Model UGT-ST310R 6-Port SATA II 150 PCI Host Card w/RAIDUser Manual w w w . v a n t e c u s a . c o mTable of Contents Bus Interface ConnectorsPackage Contents FeaturesG Jumper Settings System RequirementsHardware Description Enable SATA ConnectorHardware Installation Device ConnectionRAID 0 Striping Auto configuration recommendedRAID Arrays size, Manual Configuration is offered9. When asked Are you sure to exit Y/N?, press Y to exit and reboot Manual configuration5. Select Auto configuration, then press Enter 5. Select Manual configuration then press Enter4. Select Auto configuration, then press Enter RAID 1 Mirror For New/Blank Hard DrivesFor Existing Hard Drives with Data 8. When asked Are you sure to exitY/N?, press Y to exit and reboot11. When asked Are you sure to exitY/N?, press Y to exit and reboot Rebuilding a Failed Mirror SetRAID 0+1 Mirroring + Striping 8. When asked Are you sure to exitY/N?, press Y to exitconfiguration Auto configuration recommendedManual configuration 4. Select Auto configuration, then press Enter15. When asked Are you sure to exitY/N?, press Y to exit and reboot RAID 5 ParityAuto configuration recommended size, Manual Configuration is offered9. When asked Are you sure to exitY/N?, press Y to exit and reboot Manual configuration5. Select Auto configuration, then press Enter 5. Select Manual configuration then press Enter9. When asked Are you sure to exitY/N?, press Y to exit and reboot CONCATENATION JBODDeleting RAID Arrays Logical Drive Info Resolving ConflictsLow Level Format For A New Installation BIOS ConfigurationDriver Installation For An Existing Installation2. At Found New Hardware Wizard, click Next For A New InstallationFor Windows XP/Server For An Existing Installation For An Existing InstallationFor A New Installation For Windows XP-x64/ServerFor Windows Vista For A New InstallationFor An Existing Installation For An Existing Installation To Verify Windows InstallationFor A New Installation For Windows Vista-x64For Windows XP-x64/Server 2003-x64/Vista-x64 SATA RAID 5 Management Software InstallationFor Windows 2000/XP/Server 2003/Vista 2. Select Device Manager