drive.
4.Attach the other end of the Serial ATA cable to the Serial ATA controller on the
5.Follow the same instructions to connect up to four hard drives. Device connection is now complete.
6.Replace the computer cover and reconnect the power cord.
RAID Arrays
RAID Arrays are setup in the
RAID 0 (Striping)
This RAID array to be used on New/Blank hard drives. Striping will destroy existing data on the hard drive. Auto Configuration is recommended. For applications that require custom chunk
size, Manual Configuration is offered.
Auto configuration (recommended)
The default chunk size is 64k when selecting Auto
configuration.
1.As the BIOS boots press Ctrl+S or F4 when prompted to enter the RAID BIOS.
2.At the next screen select Create RAID Set, then press Enter.
Page 6 |
