1.Load the memory card you want to format into the camera.
2.Turn on the camera and press [MENU].
3.On the “Set Up” tab, select “Format” and then press [X].
4.Use [S] and [T] to select “Format” and then press [SET] to start formatting.
After formatting is complete, enter the PLAY mode and check to make sure the “There are no files.” message appears on the monitor screen.
•To exit the format operation without formatting, select “Cancel”.
■Memory Card Precautions
•If a memory card starts to behave abnormally, you can restore normal operation by reformatting it. However, it is recommended that you always take along more than one memory card whenever using the camera far away from the home or office.
•If you experience problems while trying to playback recorded images, try
•As you record data to and delete data from a memory card a number of times, it loses its ability to retain data. Because of this, periodic
•Make sure that the battery is charged fully before starting a formatting operation. Formatting may not be performed correctly and the memory card may be damaged if the camera powers down while formatting is in progress.
•Never open the battery cover while formatting is in progress. Doing so can damage the memory card.
51
GETTING READY