3.Use [S] and [T] to select “Trim” and then

press [SET].

This displays a cropping boundary on the monitor screen.

• To cancel the correction operation, select “Cancel”.

4.Move the zoom controller up and down to zoom the cropping boundary.

5.Use [S], [T], [W], and [X] to move the selection boundary to the desired location and

then press [SET].

The camera will correct color automatically and save the corrected image.

•If you do not want a border around the resulting image, select and area that is smaller than the original image.

•To cancel the restoration operation at any point and save the image as-is, press [MENU].

118

USING BEST SHOT