Specifying the File Name Serial Number Generation Rule

Use the following procedure to specify the rule that governs generation of the serial number used in file names (page 196).

1.Press [MENU].

2.On the “Set Up” tab, select “File No.” and then press [X].

3.Use [S] and [T] to select the setting you want and then press [SET].

To have the camera do this:

Select this

setting:

 

Remember the numbers used for files. Files will

 

be named using the next sequential number,

 

even if files are deleted or if a blank memory card

 

is loaded.

 

• If a memory card is loaded that already has

 

files stored on it and the largest sequential

Continue

number in the existing file names is greater

 

than the largest sequential number

 

remembered by the camera, numbering of new

 

files will start from the largest sequential

 

number in the existing file names plus 1.

 

 

 

Restart the serial number from 0001 whenever all

 

files are deleted or when the memory card is

 

replaced with a blank one.

 

• If a memory card is loaded that already has

Reset

files stored on it, numbering of new files will

 

start from the largest sequential number in the

 

existing file names number plus 1.

 

 

 

209

OTHER SETTINGS