2.Connect the USB cable that comes bundled with the camera to the USB cradle and the USB port of your computer.

USB Cable (Bundled)

USB Port

Connector Mini-B

Connector A

[ ] (USB) Connector

•Orient the USB plug so it correctly matches the shape of the USB port when you connect them.

•Plug the USB cable into the ports securely, as far as it will go. Proper operation is not possible if connections are not correct.

3.Open the lens cover to turn on the camera and then press [MENU].

•Do not place the camera on the USB cradle yet.

4.On the “Set Up” tab, select “USB” and then press [X].

5.Use [S] and [T] to select “Mass Storage” and then press [SET].

6.Close the lens cover to turn off the camera and then place the camera onto the USB cradle.

•Do not place the camera onto the USB cradle while it is turned on.

•If you plan to transfer images from the camera’s built-in memory to your computer, make sure there is no memory card loaded in the camera.

236

USING THE CAMERA WITH A COMPUTER