■Setting the Operation Tone Volume Level
1.Press [MENU].
2.On the “Set Up” tab, select “Sounds” and then press [X].
3.Use [S] and [T] to select “
Operation”.
4.Use [W] and [X] to specify the playback volume setting you want and then press [SET].
•You can set the volume to one of eight levels in the range of 0 (lowest) to 7 (highest).
•Setting a volume level of 0 mutes the sound.
NOTE
•The volume setting you configure here is also applied to video output (page 166).
■Setting the Playback Volume Level
You can use this procedure to set the playback volume level for movies and audio snapshots, independent of the operation tone volume.
1.Press [MENU].
2.On the “Set Up” tab, select “Sounds” and then press [X].
3.Use [S] and [T] to select “ 
Play”.
4.Use [W] and [X] to specify the operation tone volume setting you want and then press [SET].
•You can set the volume to one of eight levels in the range of 0 (lowest) to 7 (highest).
•Setting a volume level of 0 mutes the sound.
IMPORTANT!
•The volume setting you configure here does not affect the video output (page 166).
207
OTHER SETTINGS