PLAYBACK
2.Turn on the TV and select its video input mode.
3.Perform either of the following operations.
•
] to turn on the camera, and then perform the required operation for playback.
•
] or [
] to turn on the camera, and then perform the required operation for playback or recording.
IMPORTANT! 
•Make sure that “Power On” or “Power On/Off” is selected for the camera’s power on/off functions (page 178) when you connect to a TV to view images.
•All icons and indicators that appear on the monitor screen also appear on the TV screen.
•Note that the audio output is monaural.
•When the camera is on the USB cradle, pressing the cradle’s [PHOTO] button will activate the Photo Stand feature (page 152) and display images on the TV screen
•Depending on the size of the TV screen, recorded images and images during recording may not fill the entire screen
•Depending on the size of the TV screen, recorded images may not fill the entire screen
•For video output, the audio volume level is initially set to maximum. Perform volume level adjustment using TV controls.
•After using an optionally available AV cable (EMC- 3A) to connect the camera’s USB/AV connector directly to the AUDIO IN terminal of a TV (without using the USB cable), you can view recorded images on the TV and even use the TV screen to compose images before recording them
| 159 |
| C |
|
|
|
|