VIEWING IMAGES ON A COMPUTER
■Establish a connection between the camera and computer
●
1.Make sure the camera’s battery is fully charged.
2.Turn on the camera, and then press [MENU].
•It makes no difference whether the camera is in a REC mode or the PLAY mode.
3.Select the “Set Up” tab, select “USB”, and then press [].
4.Use [] and [] to select “Mass Storage”, and then press [SET].
5.Turn off the camera, and connect the USB cable that comes bundled with the camera to the camera’s USB/AV connector and your computer’s USB port.
USB port
USB cable
Connector A
Make sure that the side of the connector |
|
| |
that is marked with an arrow () is |
|
| |
facing in the same direction as the front | USB/AV | ||
(lens side) of the camera. | |||
connector | |||
| |||
•Take care when connecting the USB cable to the camera or your computer. USB ports and cable plugs are shaped for proper positioning.
| 202 |
| C |
|
|
|
|