VIEWING IMAGES ON A COMPUTER

6.Turn on the camera.

•This will cause your computer to create a hardware profile for camera’s built-in memory or the memory card loaded in the camera. You do not need to install the USB driver every time. After you install it once, your computer will recognize the camera’s built-in memory or its memory card when you establish a USB connection between the camera and your computer.

• This will cause the

Operation lamp

camera’s operation lamp to

 

light green.

 

•At this point, some operating systems will

display a “Removable Disk” dialog box. If your operating system does, close the dialog box.

●EX-Z60DX

1.Connect the bundled AC adaptor to the [DC IN 5.3V] connector of the USB cradle, and then plug it in to a household power outlet.

•If you are using battery power without the AC adaptor, make sure that the battery is fully charged.

•Note that the shape of the AC adaptor depends on the area where you purchased the camera.

203