PRINTING IMAGES

■Connecting the Camera to Your Printer

EX-Z60 Owners: Read the information below.

EX-Z60DX Owners: Read the information starting from page 194.

●EX-Z60

1.Check the battery level indicator to make sure that the battery is fully charged, and then press the power button to turn off the camera.

•If battery power is low, replace the battery.

•The camera does not draw power over the USB cable.

2.Use the USB cable that comes with the camera to connect the camera to a printer.

USB cable

USB port

USB

USB/AV connector

Make sure that the side of the connector that is marked with an arrow (￿) is facing in the same direction as the front (lens side) of the camera.

•Take care when connecting the USB cable to the camera or your printer. USB ports and cable plugs are shaped for proper positioning.

 

193

 

C