VIEWING IMAGES ON A COMPUTER

IMPORTANT!

•If you plan to transfer file data from the camera’s built-in memory to your Macintosh, make sure there is no memory card loaded in the camera. If there is, remove the memory card from the camera before you connect to your Macintosh.

■Establish a connection between the camera and your Macintosh

EX-Z60 Owners: Read the information below.

EX-Z60DX Owners: Read the information starting from page 212.

●EX-Z60

1.Make sure the camera’s battery is fully charged.

2.Turn on the camera, and then press [MENU].

•It makes no difference whether the camera is in a REC mode or the PLAY mode.

3.Select the “Set Up” tab, select “USB”, and then press [￿].

4.Use [￿] and [￿] to select “Mass Storage”, and then press [SET].

210