BASIC IMAGE RECORDING

■Using the easy Menu

The easy menu contains flash, self-timer, and image size settings, plus an item for exiting the easy mode.

3.Use [￿] and [￿] to select the setting you want, and then press [SET].

• While the camera is in the easy mode, all the other

 

settings (besides Self-timer, Image Size, and easy Mode)

on the REC tab menu (page 235) and Quality tab menu

(page 236) are fixed at preset optimum values. Any

 

settings you configured on these tabs are not used in the

easy mode.

 

• To use the Set Up tab menu (page 236), you need to exit

the easy mode. To do this, select the “easy Mode” item in

step 2 of the following procedure, and then select

in

step 3. After that, you can use the Setup tab menu as you

Menu Item:

Flash

Self-timer

Image Size

easy Mode

Exit Menu

Available Settings:

(Auto Flash) / (Flash On) /

(Flash Off)

(10-second self-timer) /

/ /

/

Exit the easy menu

normally do.

1.Press [MENU].

•The easy menu displays larger text than standard menus.

2.Use [￿] and [￿] to select the menu item you want, and then press [SET].

*Underlined settings indicate initial defaults.

•See the following sections for full details about the “Flash”, “Self-timer”, or “Image Size” settings.

—Using the Flash (page 71)

—Using the Self-timer (page 76)

—Specifying Image Size (page 79)

 

64

 

C