Playing Back Built-in Songs

TONE/SETTING SONG ￿/￿

LR

IMPORTANT!

•After you select a built-in song, it can take a number of seconds for the song data to be loaded. While the data is being loaded, the keyboard keys and button operations will be disabled. If you are playing something on the keyboard, the following operation will cause output to stop.

Playing Back All of the Built-in Songs

Your digital piano comes with a Music Library of 60 built-in tunes. You can play all 60 tunes in sequence, from beginning to end.

1. While holding down the TONE/SETTING button, press the SONG X/„ button.

•This will start repeat demo playback of the built-in songs in sequence, from 01 through 60.

•You can play along with a song on the keyboard as it is playing. The tone assigned to the keyboard is the one that is preset for the song that is playing.

•You can select a specific song during demo playback. For details, see step 2 under “Playing Back a Specific Music Library Song”.

2.Press the SONG X/„ button again to stop built-in song play.

NOTE

•The tune selection and playback stop operations described above are the only operations that are possible during demo tune play.

Playing Back a Specific Music Library Song

1. Find the song number of the song you want to play in the song list on page A-1.

2. To change to another song, hold down the TONE/SETTING button as you use the SONG SELECT keys to specify a song number.

•Each press of the + or – key raises or lowers the song number by 1.

•You can use the value input keys (0 to 9) to enter a specific song number. Be sure to input all two-digits.

Example: To select song 08, enter 0 and then 8.

3. Press the SONG X/„ button.

•This starts the playback of the song.

4.To stop playback, press the SONG X/„ button again.

•Playback will stop automatically when the end of the song is reached.

E-12