Assembling the Stand 
10. Remove the screws that hold the corner brackets in place on the back corners (the corners away from the pianist) of the side panels.
11. As shown in the illustration, reverse the corner brackets you removed in step 10, and insert pedal unit brackets
B
A
WARNING•The corner brackets help to prevent the stand from tipping over. Whenever the stand is in a location that is not up against a wall, reorient the corner brackets as shown in the illustration. Leaving the corner brackets in their original orientations can make it easy for the stand to tip over towards the back, creating the risk of personal injury.
12. Securely tighten the screws G that you temporarily tightened in step 9.
•Cover the screw heads with the caps J.
J
G
13. Secure the corner brackets to the stand using the screws you removed in step 10.
IMPORTANT!
•Press down on the edges of the pedal unit as you tighten the corner bracket screws.
•The side panels have joint connectors inside that engage with the corner bracket screws. If you have trouble inserting the screws into the joint connector screw holes, use a screwdriver to rotate the joint connector and adjust the position of the screw hole for easier access. See the detail drawing (marked with a star) in the above illustration.
B |
| |
|
| |
|
|
|