Assembling the Stand 
13. Tighten the screws you loosened in step 10 to secure the corner brackets to the side panels.
IMPORTANT!
•Press down on the edges of the pedal unit as you tighten the corner bracket screws.
To connect the cables
1. Plug the speaker box C cable into the speaker connector on the bottom of the digital piano.
2. Making sure that the pedal unit cable plug is oriented as shown in the illustration below, plug it into the pedal connector on the bottom of the digital piano.
•Use the H clips to secure the pedal cable to two locations on side panel B.
H
2 | C |
1
NOTE
•When plugging into connectors, make sure that the plug is inserted as far as it will go.
•When disconnecting the speaker cable, press the hook () as pull the plug out.
To install the music stand
1. Slide the music stand under the two bolts on the top of the digital piano as shown in the illustration and then tighten the bolts.
B |
| |
|
|