To configure presentation data playback settings

1

2

3

On the EZ-Converter 1.1 window, display the presentation data whose playback settings you want to configure.

zFor details about how to do this, see “To create presentation data” (page 20) and “To open a presentation file” (page 23).

Either click the button or select [Tools] - [Presentation File Setup].

zThis displays the Presentation File Setup dialog box.

Configure the settings you want.

To configure image change settings

Under [Display Interval], click either [Manual] or [Auto]. If you select [Auto], you then can click the down arrow button to the right and specify the display interval of each image.

To configure the repeat setting

Under [Repeat], click either [On] (repeat) or [Off] (one time).

To configure the image transition effect setting

Under [Image Transition Effect], select either [On] (transition effect enabled) or [Off] (transition effect disabled). If you select [On], you then can click the down arrow button to the right to select the effect you want to use.

4 After configuring all the settings you want, click the [OK] button.

Note

You also can configure playback settings on the projector by performing a presentation with the projector’s viewer function. For details, see “To save presentation data image files only” (page 24) and “Configuring Viewer Setup Menu Settings” (page 41).

22