You can connect a CASIO graphing calculator to the Data Projector using a USB cable and project the calculator’s screen image with the Data Projector. USB connection of the following CASIO graphing calculators is supported.
z
To project the screen image of a graphing calculator
1 Set the graphing calculator up for data communication.
Enter the LINK Mode, and configure the “Wakeup” and “Capture” settings as shown below.
zBe sure to configure these communication settings before you connect the calculator to the Data Projector.
zSee the user documentation that comes with your calculator for details about configuring these settings.
2 Turn on the Data Projector.
3 Use the USB cable that came with the graphing calculator to connect it to the Data Projector as illustrated below.
zThis will project an image of the graphing calculator from the Data Projector.
USB Cable
*The illustration shows the
59