Slideshow Start Error

The error message shown below may appear when you attempt to start a slideshow using one of the procedures under “To start a slideshow from a particular image file” (page 33), “To perform a slideshow by running a presentation file” (page 36), or “To start a slideshow from the currently displayed image file content” (page 37).

There is a problem with the slideshow setup file. Cannot start the slideshow.

If this happens, use EZ-Converter 1.1 to create a new presentation file and store it on the USB memory device or memory card. Next, use the new presentation file to run the slideshow.

Using Viewer to Play a Movie

This section explains procedures you can use to play a movie using Viewer.

Note

For details about movie files whose playback is supported, see “Supported Playback Data Types” (page 14).

To play a movie file

1

2

On the file menu, select the movie file you want to play.

zFor information about how to select a particular file on the file menu, see “To select a file or a folder” (page 32).

Press the [ENTER] key.

zThis will start playback of the selected movie file.

zIf the movie includes audio of a format that is supported by the Data Projector, the audio will be played back with the video.

3 To stop movie playback and return to the file menu, press the [ESC] key.

Note

zPressing the [ENTER] key while a file whose playback is not supported by the Data Projector is selected will cause the error message “This movie file cannot be played back.” to appear.

zTo output audio to an external speaker, use commercially available audio cable to connect the speaker to the AV terminal of the Data Projector. On the “Option Settings 2” of the “Setup” menu, select “Line” for the “USB Audio Out” setting.

zNever connect earphones or headphones to the Data Projector AV terminal.

39